Table of Contents
Configure Zigbee in Hassio
With these videos we will be able to get rid of the original Hubs and be able to put our generic one and be able to integrate Zigbee devices into our Home Assistant – Hassio.
The protagonist is the cc2531 ZigBee will be able to control compatible devices through MQTT (zigbee2mqtt in Hassio).
To install the firmware we will need a debugger and an adapter. Connect it to the USB port of the Raspberry or Nuc and it will act as a Hub between Home Assistant and ZigBee devices, this is the function of the coordinator If you want more coverage you can incorporate a router In these you install a different firmware and feed it with a power supply to make it work.
All the information you will find in the official guide in English https://github.com/Koenkk/zigbee2mqtt
Let's see how to proceed so that cc2531 se configure and zigbee2mqtt and hassio
Point 3 says: “Now insert these lines into the corresponding YALM files.”
Since they are separated, for those of us who are newbies it would be good (or rather essential) to know the YALM files to which each of the sections refers.
I know that the config.yalm file can be “divided” into several, but can you indicate which file to use if a personal configuration is not made?
Greetings, if you look at each section, at the beginning of it it indicates what it belongs to, sensor, timer, group, if you have them in groups that indicates the YAML file to which it belongs.
Pingback: Connect Hassio via Wifi - Domótica Económica
Pingback: Sonoff BASICZBR3 - Domótica Económica
Pingback: New Thread Protocol - Domótica Económica
Pingback: HOME ASSISTANT CORE 2020.12 - Domótica Económica
Pingback: Version 1.17.1 · Koenkk/zigbee2mqtt · GitHub - Domótica Económica
Pingback: 🐝 New Version Zigbee2Mqtt 1.18.0 🐝 - Domótica Económica